Refill Boxes
PACKAGING FACTS
- 86% less plastic than bottles
- 100% post-consumer recycled cardboard
- Natural, environmentally friendly inks
- No glue
- Slots together for easy assembly
- Easy to disassemble and recycle
- Collapsible packaging minimizes freight emissions
- Reusable spigot (hand wash or dishwasher safe)
- Full Circle Program: return liners to be cleaned and reused
- Or LDPE type 4 plastic liner is curbside recyclable
⬇ SCROLL FOR FULL CIRCLE PROGRAM
HOW TO SET UP
Now you can set up a refill station anywhere. Stack and store your refill boxes in a dry, temperature-stable area.
- Weighs 22 lbs
- Measures 10 x 10 x 10 inches
- Boxes can be stacked up to 3 high
- Turn onto back before switching caps
- Spigots may drip, so use a drip catcher
- Push tap to the right to shut off
- Avoid storing in hot or cold areas
- If products freeze, gently warm and shake
- Save the spigot for your next box
IMPORTANT!
Turn the box on its back before unscrewing the shipping cap and applying the spigot. Opening the cap while the box is in the upright position will result in very soapy shoes.
- Remove refill box from shipping box
- Tip box on its back
- Remove screw cap and save it
- Screw on spigot
- Stand box upright with spigot facing front
- Save one shipping box for liner returns (or use your own box later)
FULL CIRCLE PROGRAM
When your box is empty, send the liner back to us. We sanitize and reuse it—keeping plastic out of the waste stream.
Return Directions:
- When a box is empty, remove and keep the spigot (wash by hand or in dishwasher for next box). Dry completely before reuse
- Collapse the refill box and recycle the cardboard
- Please rinse the liner and drain well. Not only does this cost less to ship, it makes them easier for us to clean.
- Collapse liner by folding in half and pressing air out
- Screw the saved cap back onto collapsed liner
- Stack at least 4 liners and put them into a shipping box
- Request your prepaid return label using the form below
- Apply label and hand box to carrier